Dynamic filtering#

Dynamic filtering optimizations significantly improve the performance of queries with selective joins by avoiding reading of data that would be filtered by join condition.

Consider the following query which captures a common pattern of a fact table store_sales joined with a filtered dimension table date_dim:

SELECT count(*) FROM store_sales JOIN date_dim ON store_sales.ss_sold_date_sk = date_dim.d_date_sk WHERE d_following_holiday=’Y’ AND d_year = 2000;

Without dynamic filtering, Trino pushes predicates for the dimension table to the table scan on date_dim, and it scans all the data in the fact table since there are no filters on store_sales in the query. The join operator ends up throwing away most of the probe-side rows as the join criteria is highly selective.

When dynamic filtering is enabled, Trino collects candidate values for join condition from the processed dimension table on the right side of join. In the case of broadcast joins, the runtime predicates generated from this collection are pushed into the local table scan on the left side of the join running on the same worker.

Additionally, these runtime predicates are communicated to the coordinator over the network so that dynamic filtering can also be performed on the coordinator during enumeration of table scan splits.

For example, in the case of the Hive connector, dynamic filters are used to skip loading of partitions which don’t match the join criteria. This is known as dynamic partition pruning.

After completing the collection of dynamic filters, the coordinator also distributes them to worker nodes over the network for partitioned joins. This allows push down of dynamic filters from partitioned joins into the table scans on the left side of that join.

The results of dynamic filtering optimization can include the following benefits:

  • improved overall query performance

  • reduced network traffic between Trino and the data source

  • reduced load on the remote data source

Dynamic filtering is enabled by default. It can be disabled by setting either the enable-dynamic-filtering configuration property, or the session property enable_dynamic_filtering to false.

Support for push down of dynamic filters is specific to each connector, and the relevant underlying database or storage system. The documentation for specific connectors with support for dynamic filtering includes further details, for example the Hive connector or the Memory connector.

Analysis and confirmation#

Dynamic filtering depends on a number of factors:

  • Planner support for dynamic filtering for a given join operation in Trino. Currently inner and right joins with =, <, <=, >, >= or IS NOT DISTINCT FROM join conditions, and semi-joins with IN conditions are supported.

  • Connector support for utilizing dynamic filters pushed into the table scan at runtime. For example, the Hive connector can push dynamic filters into ORC and Parquet readers to perform stripe or row-group pruning.

  • Connector support for utilizing dynamic filters at the splits enumeration stage.

  • Size of right (build) side of the join.

You can take a closer look at the EXPLAIN plan of the query to analyze if the planner is adding dynamic filters to a specific query’s plan. For example, the explain plan for the above query can be obtained by running the following statement:

EXPLAIN
SELECT count(*)
FROM store_sales
JOIN date_dim ON store_sales.ss_sold_date_sk = date_dim.d_date_sk
WHERE d_following_holiday='Y' AND d_year = 2000;

The explain plan for this query shows dynamicFilterAssignments in the InnerJoin node with dynamic filter df_370 collected from build symbol d_date_sk. You can also see the dynamicFilter predicate as part of the Hive ScanFilterProject operator where df_370 is associated with probe symbol ss_sold_date_sk. This shows you that the planner is successful in pushing dynamic filters down to the connector in the query plan.

...

Fragment 1 [SOURCE]
    Output layout: [count_3]
    Output partitioning: SINGLE []
    Aggregate(PARTIAL)
    │   Layout: [count_3:bigint]
    │   count_3 := count(*)
    └─ InnerJoin[(""ss_sold_date_sk"" = ""d_date_sk"")][$hashvalue, $hashvalue_4]
       │   Layout: []
       │   Estimates: {rows: 0 (0B), cpu: 0, memory: 0B, network: 0B}
       │   Distribution: REPLICATED
       │   dynamicFilterAssignments = {d_date_sk -> #df_370}
       ├─ ScanFilterProject[table = hive:default:store_sales, grouped = false, filterPredicate = true, dynamicFilters = {""ss_sold_date_sk"" = #df_370}]
       │      Layout: [ss_sold_date_sk:bigint, $hashvalue:bigint]
       │      Estimates: {rows: 0 (0B), cpu: 0, memory: 0B, network: 0B}/{rows: 0 (0B), cpu: 0, memory: 0B, network: 0B}/{rows: 0 (0B), cpu: 0, memory: 0B, network: 0B}
       │      $hashvalue := combine_hash(bigint '0', COALESCE(""$operator$hash_code""(""ss_sold_date_sk""), 0))
       │      ss_sold_date_sk := ss_sold_date_sk:bigint:REGULAR
       └─ LocalExchange[HASH][$hashvalue_4] (""d_date_sk"")
          │   Layout: [d_date_sk:bigint, $hashvalue_4:bigint]
          │   Estimates: {rows: 0 (0B), cpu: 0, memory: 0B, network: 0B}
          └─ RemoteSource[2]
                 Layout: [d_date_sk:bigint, $hashvalue_5:bigint]

Fragment 2 [SOURCE]
    Output layout: [d_date_sk, $hashvalue_6]
    Output partitioning: BROADCAST []
    ScanFilterProject[table = hive:default:date_dim, grouped = false, filterPredicate = ((""d_following_holiday"" = CAST('Y' AS char(1))) AND (""d_year"" = 2000))]
        Layout: [d_date_sk:bigint, $hashvalue_6:bigint]
        Estimates: {rows: 0 (0B), cpu: 0, memory: 0B, network: 0B}/{rows: 0 (0B), cpu: 0, memory: 0B, network: 0B}/{rows: 0 (0B), cpu: 0, memory: 0B, network: 0B}
        $hashvalue_6 := combine_hash(bigint '0', COALESCE(""$operator$hash_code""(""d_date_sk""), 0))
        d_following_holiday := d_following_holiday:char(1):REGULAR
        d_date_sk := d_date_sk:bigint:REGULAR
        d_year := d_year:int:REGULAR

During execution of a query with dynamic filters, Trino populates statistics about dynamic filters in the QueryInfo JSON available through the Web UI. In the queryStats section, statistics about dynamic filters collected by the coordinator can be found in the dynamicFiltersStats structure.

"dynamicFiltersStats" : {
      "dynamicFilterDomainStats" : [ {
        "dynamicFilterId" : "df_370",
        "simplifiedDomain" : "[ SortedRangeSet[type=bigint, ranges=3, {[2451546], ..., [2451905]}] ]",
        "collectionDuration" : "2.34s"
      } ],
      "lazyDynamicFilters" : 1,
      "replicatedDynamicFilters" : 1,
      "totalDynamicFilters" : 1,
      "dynamicFiltersCompleted" : 1
}

Push down of dynamic filters into a table scan on the worker nodes can be verified by looking at the operator statistics for that table scan. dynamicFilterSplitsProcessed records the number of splits processed after a dynamic filter is pushed down to the table scan.

"operatorType" : "ScanFilterAndProjectOperator",
"totalDrivers" : 1,
"addInputCalls" : 762,
"addInputWall" : "0.00ns",
"addInputCpu" : "0.00ns",
"physicalInputDataSize" : "0B",
"physicalInputPositions" : 28800991,
"inputPositions" : 28800991,
"dynamicFilterSplitsProcessed" : 1,

Dynamic filters are reported as a part of the EXPLAIN ANALYZE plan in the statistics for ScanFilterProject nodes.

...

 └─ InnerJoin[("ss_sold_date_sk" = "d_date_sk")][$hashvalue, $hashvalue_4]
    │   Layout: []
    │   Estimates: {rows: 11859 (0B), cpu: 8.84M, memory: 3.19kB, network: 3.19kB}
    │   CPU: 78.00ms (30.00%), Scheduled: 295.00ms (47.05%), Output: 296 rows (0B)
    │   Left (probe) Input avg.: 120527.00 rows, Input std.dev.: 0.00%
    │   Right (build) Input avg.: 0.19 rows, Input std.dev.: 208.17%
    │   Distribution: REPLICATED
    │   dynamicFilterAssignments = {d_date_sk -> #df_370}
    ├─ ScanFilterProject[table = hive:default:store_sales, grouped = false, filterPredicate = true, dynamicFilters = {"ss_sold_date_sk" = #df_370}]
    │      Layout: [ss_sold_date_sk:bigint, $hashvalue:bigint]
    │      Estimates: {rows: 120527 (2.03MB), cpu: 1017.64k, memory: 0B, network: 0B}/{rows: 120527 (2.03MB), cpu: 1.99M, memory: 0B, network: 0B}/{rows: 120527 (2.03MB), cpu: 4.02M, memory: 0B, network: 0B}
    │      CPU: 49.00ms (18.85%), Scheduled: 123.00ms (19.62%), Output: 120527 rows (2.07MB)
    │      Input avg.: 120527.00 rows, Input std.dev.: 0.00%
    │      $hashvalue := combine_hash(bigint '0', COALESCE("$operator$hash_code"("ss_sold_date_sk"), 0))
    │      ss_sold_date_sk := ss_sold_date_sk:bigint:REGULAR
    │      Input: 120527 rows (1.03MB), Filtered: 0.00%
    │      Dynamic filters:
    │          - df_370, [ SortedRangeSet[type=bigint, ranges=3, {[2451546], ..., [2451905]}] ], collection time=2.34s
    |
...

Dynamic filter collection thresholds#

In order for dynamic filtering to work, the smaller dimension table needs to be chosen as a join’s build side. The cost-based optimizer can automatically do this using table statistics provided by connectors. Therefore, it is recommended to keep table statistics up to date and rely on the CBO to correctly choose the smaller table on the build side of join.

Collection of values of the join key columns from the build side for dynamic filtering may incur additional CPU overhead during query execution. Therefore, to limit the overhead of collecting dynamic filters to the cases where the join operator is likely to be selective, Trino defines thresholds on the size of dynamic filters collected from build side tasks. Collection of dynamic filters for joins with large build sides can be enabled using the enable-large-dynamic-filters configuration property or the enable_large_dynamic_filters session property.

When large dynamic filters are enabled, limits on the size of dynamic filters can be configured using the configuration properties dynamic-filtering.large.max-distinct-values-per-driver, dynamic-filtering.large.max-size-per-driver , dynamic-filtering.large.range-row-limit-per-driver, dynamic-filtering.large-partitioned.max-distinct-values-per-driver, dynamic-filtering.large-partitioned.max-size-per-driver and dynamic-filtering.large-partitioned.range-row-limit-per-driver.

Similarly, limits for dynamic filters when enable-large-dynamic-filters is not enabled can be configured using configuration properties like dynamic-filtering.small.max-distinct-values-per-driver, dynamic-filtering.small.max-size-per-driver , dynamic-filtering.small.range-row-limit-per-driver, dynamic-filtering.small-partitioned.max-distinct-values-per-driver, dynamic-filtering.small-partitioned.max-size-per-driver and dynamic-filtering.small-partitioned.range-row-limit-per-driver.

The dynamic-filtering.large.* and dynamic-filtering.small.* limits are applied when dynamic filters are collected before build side is partitioned on join keys (when broadcast join is chosen or when fault tolerant execution is enabled). The dynamic-filtering.large-partitioned.* and dynamic-filtering.small-partitioned.* limits are applied when dynamic filters are collected after build side is partitioned on join keys (when partitioned join is chosen and fault tolerant execution is disabled).

The properties based on max-distinct-values-per-driver and max-size-per-driver define thresholds for the size up to which dynamic filters are collected in a distinct values data structure. When the build side exceeds these thresholds, Trino switches to collecting min and max values per column to reduce overhead. This min-max filter has much lower granularity than the distinct values filter. However, it may still be beneficial in filtering some data from the probe side, especially when a range of values is selected from the build side of the join. The limits for min-max filters collection are defined by the properties based on range-row-limit-per-driver.

Dimension tables layout#

Dynamic filtering works best for dimension tables where table keys are correlated with columns.

For example, a date dimension key column should be correlated with a date column, so the table keys monotonically increase with date values. An address dimension key can be composed of other columns such as COUNTRY-STATE-ZIP-ADDRESS_ID with an example value of US-NY-10001-1234. This usage allows dynamic filtering to succeed even with a large number of selected rows from the dimension table.

Limitations#

  • Min-max dynamic filter collection is not supported for DOUBLE, REAL and unorderable data types.

  • Dynamic filtering is not supported for DOUBLE and REAL data types when using IS NOT DISTINCT FROM predicate.

  • Dynamic filtering is supported when the join key contains a cast from the build key type to the probe key type. Dynamic filtering is also supported in limited scenarios when there is an implicit cast from the probe key type to the build key type. For example, dynamic filtering is supported when the build side key is of DOUBLE type and the probe side key is of REAL or INTEGER type.